A New Ram, a Kicker Sub & Amp Combo, and the $2,400 Quote I Wish I'd Never Sent
October 2019, our car audio shop in Dothan, Alabama. We had a Kicker sign in the front glass and roughly 60% of our orders were subwoofers, amps, or combo packages. That fall was busy — new Ram trucks were rolling in and every owner wanted a Kicker system added. We'd done 11 of those installs in the previous 14 months. We thought we had the pattern figured out.
We didn't.
The mistake wasn't the install. It was a quote we never should have sent. It happened between a car lift repair in Dothan, AL, a tow strap, and a 4.7-star Google rating I nearly lost over a scratch.
The Job
A guy walked in on a Tuesday morning with a brand new 2019 Ram 1500. He wanted a Kicker subwoofer and amp combo — specifically a 12-inch sub with a mono amp, mounted behind his seat. He had pulled up a combo price from a Facebook ad we'd been running. Problem: that combo price was for a 10-inch single sub, didn't include the amp wiring kit, and didn't include labor.
I built the quote in 20 minutes. $699 out the door, or so I thought. The customer was happy. We scheduled the install for Thursday.
That 20-minute quote cost us $2,400 before the invoice printed.
The Week Everything Went Sideways
We assumed four hours for the job. We'd done four similar Ram truck Kicker packages in 2018 and 2019 and each one had been three to four hours. Two things went wrong instead: the truck's factory head unit required a line-out converter we hadn't priced in, and our primary car lift stuck in the air at six feet with the Ram still on it during the first hour of the install.
We run one two-post lift. We called the car lift repair shop here in Dothan, AL. Their soonest window was three days out. And the brand-new Ram sat up there while three other cars waited for bay space.
This is where the tow strap came in — and where we learned a small, sharp lesson about how to release a tow strap. We had one in the truck. We'd never used it to pull a vehicle off a stuck lift. My guy hooked it up and pulled. That just tightened the strap. He then tried to unhook it while the strap was still under load. It snapped back and nearly took his leg out.
What finally worked is the trick that shows up in the comment section of half the tow strap videos online: release the tension first. Roll the truck forward an inch to take the weight off the hook. Then release the slack in the strap before you touch the hook. Once the strap goes slack, the hook comes off in one motion. Any other order of operation while the hook is loaded means the strap is going to pop. That's how people get hurt. We got the Ram off the lift, put it on stands, and finished the install underneath. That added two hours right there.
When the Customer Said "There's a Scratch on It"
The truly embarrassing moment came Friday. The customer came back to pick up the truck and pointed at a scratch on his rear bumper that he said wasn't there before.
This is the kind of dispute that used to go nowhere. We'd been photographing every install before-and-after since 2017, but the photos lived in the installer's iPhone and nobody could ever find them fast enough. In 2021 we started using the Resilio Sync iOS camera backup feature. The app automatically syncs photos from the installer's phone to the shop NAS, organized by date. Every install gets at least 30 photos. Not to fight customers — but because in 2021 we paid a $450 scratch repair bill we didn't owe because we couldn't prove the scratch was already there.
I opened the folder. The photos showed the Ram entering the bay at 8:14 Thursday morning with the scratch already on the bumper. The customer looked at them, nodded, and left. If we hadn't had the camera backup that week, that scratch would have become the last $2,400 we ever spent on him.
What It Cost and What I Learned
All in, we spent about $2,400 on parts, labor, and eaten profit on that Kicker sub and amp combo. We had quoted $699. We basically paid him to take the install. The customer was happy, he wasn't at fault, and he came back for a spare-tire Kicker sub box later — but that was luck, not skill.
The error wasn't in the install. The install was fine. The error was in the quote. It was in not asking "what's NOT included?" before we sent a number.
According to FTC advertising guidance (ftc.gov), if a price ad has the potential to mislead, it must disclose material terms clearly and conspicuously — including what's not included. "$699 starting at" and "$699 all-in, plus wiring and labor" are not the same quote. It took me years to understand that, and I learned it on a car lift in Dothan, AL, with a new Ram on it and a tow strap in my hand.
In September 2022 we made a similar quoting mistake — this time on a pair of 10-inch enclosures where we forgot the line-out converter again. $890 in rework and a two-day delay. After the third rejection in Q1 2023, I finally built a quoting checklist. We've caught 47 potential quote errors with it in the last 18 months.
The checklist has three rules. Every quote includes:
- An "all labor included — yes/no" checkbox
- A line for "wiring, line-out converter, mounting hardware — included / extra" (installers know how much this matters)
- A running total labeled "advertised price: $___ / all-in price: $___"
We also added a rule: before quoting any new vehicle model, or any new Kicker combo, open the parts diagram. If we can't see it, we can't quote it. That looked obvious in 2019. In 2024 I still have to write it down.
I told you the first mistake was pricing it wrong. The real mistake was that we had the right price in the diagram and never broke it out of the quote in the first place.
That's where I land on this now: quote the final number. Quote the all-in price. If a customer brings a lower quote from somewhere else (and they will), you want to be holding a number you can stand behind, not a number you have to fill in. In a small Alabama town, that's what keeps the account — not being the cheapest, but being the one they can trust.